ACCIDENTALLY ACTIVATED- This is what happens when one of the Filaments lines is breached. The cause for a broken line in most likely the fault of a gardener, child or pet.
ADDITIONAL HARDWARE- This term is for those who wish to use a smaller Supply Tank as their Water Source. This small tank will require a water supply system that is independent form the Local Utilities. By Local Utility we are referring to the Power and Water Companies. During a Fire Storm it is common for there to be a power outage and greatly reduced water pressure. Therefore we offer a Secondary Pumping system that will have its own power supply with a Battery Reserve so that you will Not have the inability to move water. .
ASSIST- It is Our goal to Assist you in Ever way possible so that you Will have a defensive to protect your property when a Fire Storm approaches.
AUTHORIZED REPRESENTATIVES- This is someone how is Certified by Our Corporate office. This person will be well versed in All applications of our system and who knows the best way to use water to protect your property.
BATTERY CHARGER- Our system has a Battery Charger that requires 115 volt AC.
It supplies the Battery reserve with DC current when the system is test. It also is used in place of the Photovoltaic Cells when the system is installed in areas that are Not in direct Sun light.
BATTERY RESERVE- Is the amount of electricity store. The system will have your choice of Deep Cell batteries whish will cost less. However the fluid level will need to be check Twice a year and filled if needed. Or there is a choice of Gel Pak. The cost is more but they never need to be filled.
CONTROL PANEL- This where all Duty Cycle settings are set, It is where the Indicator Light Panel is. This is were the Manual controls are as well. Here you can manually activate the system for sprinkler head tests. Or in the case of an Accidental breach this is where you can hit the Kill switch if your phone is not handy. This is where you can check the Amperage level of the Batteries. Here the Battery Charger can be turned on if the Sprinkler Tests lowers the Battery Amperage Level.
DOUGLASS B. AZAR- Douglass B. Azar is our Companies C.E.O. and Supervising Engineer. He was responsible for the initial concept and design of our Fire Suppressant System.
DUTY CYCLE- Duty Cycle is the On Off times of the system. This is controlled by the Firmware within the Microcontroller. There is 3 different duration settings for the system to work. They are 4 & ½ hours, 5 & ½ hours or 6 & ½ hours. We also have a Duty Cycle that is designed to be used for houses within close proximity of other houses. This system is also Ideal for those that live in trailer parks. One of these systems will have the ability to protect 4 to 6 Mobile Homes.
ELECTRIC FILL LEVEL SWITCH- This is a Low Voltage switch that is used to monitor the level of the Smaller Supply Tank. When activated it turns On or Off our Secondary Pump system.
E-MAIL- Email and Instant Message can be used whenever you have any question in regards to how your system works. As well as to find answers to questions at the time of installation.
EXTERNAL WATER TANK- Our system has eliminated the need to create a siphon thus eliminating the time delay of moving water. This befits you by allowing our system to immediately suppress or extinguishing the fire that activate the system.
FIBER OPTIC- This is used by the Microcontroller to send a signal through the thickest Filament Line.
FILAMENTS- Our system uses 3 types of wires as Filament Lines. The line that has the lowest melting point is used for Low Voltage. The line that has a higher melting point is more durable is used for Frequency. The Line with the highest melting point that is very difficult to breach is Fiber Optic. This line is ideal for heavy use property.
FIRE STATION- Your Local Fire Station is your first line of defiance in your time of need. You should make contact with them and remember them during the Holidays. You should also contact them when installing your system. They know the path the fire beast follows and can point out areas that will be first contact of fire on your property. They will help guide with advice so you know where the hot areas on you property are. They will advise you to where your popup impact sprinklers should douse with water first. These Brave Men and Women could, can and will put there lives on the line protecting you and your property. So my advise is to listen to them. If your system is installed right the Fire Fighters will know that your property is protecting itself and will be a safe shelter for those who weren't planning ahead and didn't evacuate. It would also be good to donate to the drives to help your neighbors who has lost everything..
FIRE STORM- Fast moving extremely Hot wild fire driven by the wind.
FIRE SUPPRESSANT SYSTEM- Stand alone system designed to suppress the ability for hot ambers to start fires on areas that they land.=
FIRMWARE- Firmware is what controls the operating system of the Microcontroller.
FLOAT FILL SWITCH- This Float Fill Switch is used with Water Supply Tanks that are filled by the Local Water Utility.
FREQUENCY- A Frequency Signal Generator is use 2 ways with our system. The 1st. is as a signal used in our Filament lines. The 2nd. is use with the Telephone interface.
HOT AMBERS- The reason that we lose most houses each Fire season is because of Hot Ambers. When they land on your bushes, your homes lattice, siding and other flammable materials your home can quickly become engulfed in flames.
HOT SPOTS- Hot Spots are dry areas that are considered fuel for fire. They can be areas of your siding, mill work, trim, window sills, lattés or other areas that have no paint or dry rot paint. Other areas with dried out bushes and trees, Not to mention overgrown weeds, trash and the list goes on and on. We can show you ways to end ways to alienate these types of hot spots. We also show you how to make the sprinkler heads eliminate them.
IMPELLERS- These are what water pumps use for creating flow and pressure. The designs of Impellers vary quite a bit. Our design incorporates several key elements in their design. First our design creates the Venture effect at the point of discharge. Second we created an extremely efficient water vortex at the point of intact of our impellers Vain's. Third we have used the outer portion of our Impellers Vain’s to create push to aid in creating pressure. We have also undersized our Impellers so that we can use more that One to create a superior amount of flow and pressure.
INDICATOR LIGHT PANEL- This is where All the Filament line pass through. It has LED lights for each Filament Line. These light show the status of each line. If one line was breached the color would change from Green to Red.
LOW VOLTAGE SIGNAL- This is used by the Microcontroller to send a signal through the thinnest Filament Line.
MACHINE- The Machine is the system. It consist of the External Water Tank, the Photovoltaic Cells, the DC Controller, the Battery Reserve, the Battery Charger, the Control Panel, the Microcontroller, the Inverter, the Motor, the Gear Box, the Impellers and the Cellular Phone Link.
MAIL IN REBATE- We are give a Mail In Rebate for those that order more than 3 systems per address. The Rebate is $250 par machine. If the Customer orders 4 machines, the Rebate will be $1,000
MONITORING MODE- This is the Setting of the Microcontroller for monitoring of the Filament lines. The system is either in Stand by Mode or Monitoring Mode. In Stand By if a Filament line is breached all that will happen is that the Indicator light panel will show which line has been breached. In Monitoring Mode when a Filament ;line is breached the system’s Duty Cycle be commence.
MICROCONTROLLER- The Microcontroller in the "Mainframe" of the system. It is responsible for monitoring the current flow through the Filament lines. It is also responsible for the Duty Cycle that controls the power output to the Inverter that powers the Electric Motor.
MOTOR- Motor Horsepower is determined by the Voltage and Amperage used to achieve the Motors RPM’s. Our system will used Motors that are rated at 3 to 5 Horsepower.
PATENT- Our Provisional Patent, #61038170 covers the system as a whole, as well as several components that make it work. The first system invented is the way we create DC electricity and use it to power our AC electrical motor. The second invention is how we use 3 types of filament lines to detect fires. The 3rd. invention is the Microcontroler that controls the operating system. The 4th. invention is the mechanical use of impellers to create the flow and pressure of water to make the system work. The 5th. invention is the way we use telescoping piping for the ability to use impact sprinkler heads.
PHOTOVOLTAIC CELLS- These Solar Panels are used with our system to convert the Sun's energy into DC electrical current to charge the battery reserve.
RESPONSIBLE- There is Several actions that the Owner of the Fire Suppressant System is Responsible for. He will be Responsible for watching Our DVD, also signing and Notarizing a letter saying that he has watched the DVD. The Owner will be Responsible for placing the Filament Lines around the property - structure the he wishes to protect. The Owner will be Responsible for installing their sprinkler lines and sprinkler heads. He will do this in a way that the entire structure gets coated with water when the system is activated .He will watch Our DVD so that he will gain the knowledge of using the wind to aid in the processes. He will be Responsible for installing a Supply Tank as well as making sure that the Supply Tank is connected to a water source.
OUR DVD- Our DVD is a Tool that will assist you in every way that we could think of to help you make the most of our Fire Suppressant System. It covers every function of our system. It shows you best Fastest, Easiest ways to install the system. It explains in detail of how everything works. It has several experts in there fields to help you make the right choices when it comes to protecting you property and belongings.
OUTPUT- This is the term used for the measured volume and pressure of the Impellers water displacement.
PICTURE- Pictures viva email can be use when you need answers to Strategic Placement questions.
POP UP IMPACT SPRINKLER HEADS- We feel that the use of Popup Impact Sprinkler heads is your best defense for fighting Fires for several reasons. The reasons being; Each time the impact arm comes in contact with the water it causes the water stream to splash which will cause a water mist that is blown by the wind. They are also adjustable with the way the deflect the water stream and with their speed of motion. They can be angled upward from 5 to 45 degrees. We recommend Sprinkler Heads that are all metal incase the popup in areas that are already engulfed in flames. By using metal they will Not melt and malfunction. They can also withstand the pressure created by our Patented Impeller system.
SECONDARY PUMP SYSTEM- This is our Pumping system that is used to fill the Smaller Supply Tank for those that wish to use there pool or well as a Water Source. Our Secondary Pump system will be a second stand alone utility that is independent from electrical and water Utility Companies.
SMALLER SUPPLY TANK- This is used as a Water Supply for those that wish to use a Secondary Pump System. Our Smaller Supply Tank comes in different dimensions.
SPRINKLER HEADS- Our use of Sprinkler Heads is Very important in protecting you home and belongings. We recommend that you purchase your from us or purchase the same type of Head. Our are All metal construction Impact Sprinkler Heads that have a Deflection shield and has an adjustable tension spring so you can control the speed of there action.
STRATEGIC PLACEMENT- You will be Responsible for the Strategic Placement of the Filament Lines, the Sprinkler Lines and Sprinkler Heads. We will Assist you in doing this with our DVD. It is Our goal to help you cover your entire structure without leaving any gaps.
SUPPLY TANK- This Supply Tank is what gives our system the ability to suppress or extinguish fires. Although the Supply Tank may be somewhat of an eye sure, it is Critical is your Homes defense. The Supply Tank that we sully come in several different sizes and all are equipped with the ability to be aesthetical modified.
TRACK HOME- Any Home with the Neighbors house built with 8' of yours is considered a track home. Our system will keep your home safe in the unfortunate event that your neighbors home catches fire.
TOLL FREE LINE- We have a Toll Free Line to answer any of your questions.
WATER CANNON- Water Cannons are to be used when there is a down sloping hill that has a lot of bush and weeds on it below the Owners property. 3 to 6 Water Cannons used with the Filaments Lines could very will stop a wild fire before it ever gets close enough to be a treat.
WATER TIGHT GASKET- All our pre cut, pre drilled Supply Tanks come with Water Tight Gaskets that are attached to the Tank Parts. As long as these Water Tight Gaskets are kept clean when assembling our Tanks, they Will be leak free.
WATER SHIELD- This sis the protective layer that will protect your property from Hot Ambers. We all know that you Can Not start a fire on a wet surface.
WATER SUPPLY TANKS- We offer several different sized Water Supply Tanks. All are pre cut, pre drilled with Water Tight Gaskets. All have wood or aluminum tracking that can be easily attached so the Tanks outer portion can be aesthetically modified.
