![[Under Construction]](images/undercon.gif){kind=small}
Installers and Service Technicians
Our System will prevent this!
Our Fire Suppressant System was Engineered to keep Your house or building from burning down when a Fire Storm approaches.
You will be able to evacuate with the confidence that when it’s safe for you to return,
that your home and all your belongings will still be intact.
Our Fire Suppressant System is truly unique. It is so Revolutionary in the way it works, that it has a Patent Pending #61038170 & #61087057.
Our System protects your home form All sides, not just the street.
Our concept was to design a system that would create the Maximum amount of water flow under high pressure while using the least amount of electricity. The reason for this approach was so that our system would be a stand alone utility that is independent from everything else.
Our Engineers stayed true to our concept when designing our Fire Suppressant System. The systems power was designed so that if your home or building is currently vacant without the luxury of electricity, it will still function when needed. It has Photovoltaic Cells that keeps its Battery Reserve fully charged year round. It also has on board a Battery Charger so that you can test the Fire Suppressant System without any loss to the Battery Reserve amperage level. The Battery Reserve holds enough electrical current to not only allow the system to run its Duty Cycle, but it has enough in reserve to power the Duty Cycles first phase if it is needed a second time without being recharged.
Our Fire Suppressant System is also designed to be Smart when it comes to protecting your property. In the event that the system has been activated ,it will call its pre programmed phone number. It will do this so you can call your house, a neighbor or the local fire department to see if there is in fact a fire. It you find that the system was Accidentally Activated you will be able to call your Fire Suppressant System and turn it off. It has this function to reserve batteries and water in the event of an accident. You can then call the system back to activate the Monitoring Mode of its Microcontroller so it is once again on guard protecting your home and possessions.
Our Fire Suppressant Systems Monitoring System is another unique feature that is also included (in our patent). You have a "Choice" of Three different types of wires as Filaments.
The first option is a Thin wire that allows a Low Voltage Signal to pass thru it. This style of wire is for those that want the maximum sensitivity level to detect a fire.
The second will be a Thicker wire that allows a Frequency to pass thru it. This style of wire is for those that have children or pets. By using the thicker wire there will be less of a chance that the system will be accidentally activated.
The Third choice of wire filament will be a Fiber Optic line. The line will be extremely difficult to break. This type of line can be partially cut and still function. This line is recommended for those wishing to protect a small business, a church, a barn or if the property has heavy use.
There will be Six different zones for whichever type of filament you choose. You will be Responsible for running the filament lines around the property perimeter, around the structure as well as on the structure it self. We will Assist you in determining where the potential Hot Spots are located. We do this with Our DVD. On Our DVD. we will show you the best place to run your filament lines so they are in the path of the fire as it starts to spread. These lines are very thin and can be painted so that they are not seen.
On the Fire Suppressant System Machine there is a Control Panel. On which there is a LED INDICATOR PANEL If your Fire Suppressant System called you and you then turned it off because you determined it was activated accidentally. With the LED Indicator light Panel it will be easy for you to find the breach. Because you were Responsible for running the filament lines, all you need to do is look at the color of the LED Indicator light Panel to see which one is Red. Then you will walk the line and look for the breach. The first and second types of filament wires will only require a pair of scissors and a pair of pliers to repair the line. The Fiber Optic is a little more difficult but can be spliced together in only a few minutes.
These filament lines that pass thru the LED Indicator light Panel on their way to the Microcontroller. The Micro Controller contains the Firmware that dictates the Duty Cycle. The Duty Cycle has Three options for length of operation. We will help you to make the right choice for which is the right setting for your property.
A big factor in which setting you choose will be your location. Some areas are very hilly with lots of "Weeds" and bushes. Others are densely wooded. While some areas are surrounded by houses that are filled with petroleum by products that may burn for extended periods. Prevailing winds is another factor to consider. In any event Our D.V.D. is very thorough in helping you make the right decisions in Fire Suppression setting.
Along with the Filament Lines and Duty Cycle selection is Strategic placement of your sprinkler lines and Sprinkler Heads that you will be Responsible for. You have choices with this as well. Our Fire Suppressant System Engineers have also included in our Patent the unique way that we achieve the high flow and pressure of water while consuming such little electricity. By having so much water flow and pressure gives you the ability to suppress and or prevent fires by using a multitude of Sprinkler Heads.
By this we mean that if your house is on the edge of a hill at the end of your street. And you run your Filament Lines Five hundred to a Thousand feet or more down the slope of the hill. Once the Filament Line is breach by a fire you will have enough water flow and pressure to power several Water Canons. This will Stop the fire from climbing that portion of the slope. There is also a good chance that you will also extinguish any and all hot ambers that can be blown on your home as well.
If your house and Fire Suppressant System is Not able to prevent fire from coming to your property due to the landscape, you Will still be able to protect your structure and belongings from the Hot Ambers with up to Sixteen Sprinkler Heads per Fire Suppressant System. If you have a big house on top of the hill don’t worry about the cost of buying 3 or more of our Fire Suppressant Systems. You will qualify for our Mail In Rebate of $250 per machine when you purchase Three or more Fire Suppressant Systems for that address.
Whether you use Water Canons or Sprinkler Heads, hot ambers can’t start a fire on a wet surface. Strategic Placement of Sprinkler Heads is very important. Our D.V.D. covers this in depth. There are many factors to consider that must be taken into consideration when starting Strategic Placement of Sprinkler Heads. We will help all that we can with Our D.V.D., Picture Email, Toll-free Line and for those that request one of our Authorized Representatives will come to your location. Our goal is to help you create a Water Shield that covers your entire house!
We also have designed a system for those that live in Housing Tracks were each of the houses are only a few feet apart. This system will also be Ideal for those who live in Mobile Home Parks. The machine itself is the same, however the Duty Cycle time duration is much different. The Supply Tank for this system is also much smaller and is filled by the local water utility. The size of its Supply Tank is Four feet tall by Three feet wide by Five feet long. We recommend that this system call your Local Fire Station when activated. The reason for the size of the Supply Tank, Duty Cycle duration and Fire Station call is so your house will not catch on fire when your neighbors house is on fire.
When choosing the Sprinkler Heads you will also have the option of using our Patented Pop-up Impact Sprinkler Heads. These are by far superior to any other sprinkler heads that can be purchased for this application. Our Pop-up Impact Sprinkler Heads are housed in their own little box that has an opening and closing lid. These boxes can be buried or attached to the house and painted . They are perfect for surrounding our house. Because they have couplers that allow the Sprinkler Head to point upwards from minus forty five to ninety degrees. This allows our Sprinkler Heads to put water where its needed when the Fire Storm starts showering your structure with Hot Ambers that are being blown by the wind. Our Sprinkler Heads Housing can also be attached to the building in places like under the soffit and eves so they can work with prevailing strong winds. They can also be installed on the roof without any visual impact.
Our Engineers were concerned with the time delay that is required to achieve a siphon by the impeller of the water pump. Although our Patented Fire Suppressant System uses Two Impellers and achieves a siphon in Half the time of ordinary water pumps, Any delay when suppressing a fire is too long. So our Engineers have included an External Water tank on our Fire Suppressant System. The External Water Tank holds over Three hundred and Fifty gallons of water. By having the Output of the External Water Tank at the bottom of the tank which is level with the Intake on the Fire Suppressant Systems Intake to the Impellers. The design eliminates the need to siphon the water. Once the motor starts spinning the impellers push water immediately. Although Two hundred gallons of water is only enough water for the Fire Suppressant System to spray water for a few minutes, this may be enough water to extinguish the flame that activated the Fire Suppressant System. It is also enough water to prevent other fires from starting.
Our patented way of moving water is the Best way to suppress a Fire Storm. The only draw back of our Fire Suppressant System is that it requires water. There is more that one way to supply water to the Fire Suppressant System External Tank, however we highly recommend that you use a Supply Tank that is at least One or Two degrees up hill from the Fire Suppressant System. We will supply you with the Supply Tank dimensions if you choose to build one yourself. If you have a pool or well that you would like to use to supply the External Tank this will work but requires Additional Hardware. We strongly discourage that you use this type of application as your supply source. If there are any troubles moving this water, your house could very well go up in flames.
If you choose to use your pool or well as the water supply we also make a water pump that can be attached to either of these. This Secondary Pump System setup designed to be powered by batteries which is independent from the local electricity utility. However, we still recommend that you use a Smaller Supply Tank so that the Fire Suppressant System does Not run out of water when your home requires being dosed with it. The size of the Smaller Supply Tank that we manufacture is Three feet wide by Four feet tall by Eight feet long. This tank comes with an electric fill level switch that will turn on the Secondary Pump so the Fire Suppressant System does not run out of water during the operation of the Duty Cycle. This tanks switch Must have an electric conduit line run to the Secondary Pump System. The Small Water Supply Tank is Not recommended for those who’s water supply is the local water utility.
The Supply Tank whether being large or small that are made by us comes ready to assemble. We feel that they are your best choice in more ways than one. Whichever one you choose will come in a box and is made of pre cut aluminum with all its holes pre drilled. It comes with a Fitted Water Tight Gasket. It all bolts together with easy to follow picture instructions. All parts to assemble it together are color coded for easy assembly, Our Supply Tanks come with wood tracking so siding can be installed on them. Once completed next to a Seventeen foot long or longer wall, it will look like part of the house that is there to protect.
We have Three different sized Water Supply Tanks. One of the tanks is Four feet tall by Four feet wide by Sixteen feet long. The second tank is Three feet wide by Five feet tall by Sixteen feet long. The Third is Two and One half feet wide by Six and One half feet tall by Sixteen feet long. Each of these tanks has a float fill switch designed to be filled by the local water utility.
The only requirement for using a supply tank is that you install it so that it is slightly uphill from the Fire Suppressant System.
For more Information about Our system while this Web Page is under construction,
please call our C.E.O., Douglass B. Azar’s
cell phone (702)-807-4824
fax (702)-240-2927
4425 E. Sahara #8 Las Vegas, NV. 89104
fire_suppressant_systems@yahoo.com
